Please call 800.334.1470 ext. 200 for any of these services.
- Complete range of replacement parts, motors, controls, etc. available
- Shipping options to meet your needs (overnight, two-day, ground) for most parts
- Trouble-shooting and repair technicians available
- Supplied in conjunction with parts for ease of installation and trouble-shooting
- Bulletins include:
- O-Ring Air Seal Installation Bulletin
- Excessive Vibration/Wringer Out-of-Balance Diagnostic Bulletin
- Wringer Exploded Views
- Retrofitting Upgrades
- Copies shipped with systems
- Additional copies and French, German, or Spanish versions available
Inter-Source systems are fully warranted for one year. Service and preventative maintenance are available after the warranty period on a per-call or service contract basis. These visits include system review and appropriate adjustments to ensure optimal operations.
Inter-Source will provide an opportunity for you to inspect your equipment in a static state. Comprehensive setup and runoff are also available.
Photographs or samples of actual chips help ensure initial engineering and component development will best satisfy your unique application requirements.
Single 30″ System
Single 30″ system with hydraulic cart dumper feeding an incline screw conveyor that meters chips through a shredder for uniform chip sizing.
Chips then pass through a parts separator which serves to remove solids and tooling and meter the flow of material into the 30″ wringer where fluids are removed from chips.
Chips are then pneumatically transported overhead up to 100′ to a cyclone and discharged via a mechanically operated swivel chute into open top containers.
Single 40″ System
Single 40″ system with hydraulic cart dumper feeding a horizontal twin screw conveyor that meters chips through a dual drive shredder for uniform chip sizing.
Sized chips pass through the shredder and are transported via a steel belt conveyor through a vibratory deck which removes large solids into a parts separator which removes remaining solids and tooling and meters the chips into the 40″ wringer.
The wringer removes fluids from the chips and dry chips are pneumatically transported overhead up to 100′ and discharged into an enclosed van type semi trailer.
Dual 50″ System
Dual 50″ system for foundry operation.
Material loaded into horizontal twin screw conveyor that meters chips through a dual drive shredder for uniform chip sizing.
Sized chips pass through the shredder and are transported via a steel belt conveyor to a horizontal dual directional twin screw conveyor.
This conveyor transports material evenly into two parts separators which remove solids and tooling and serve to meter the flow of chips into the two 50″ wringers.
The wringers remove fluids from the chips and the dry chips are pneumatically transported to two cyclones which drop dry chips into two triple drum magnetic separators.
These magnetic separators remove ferrous contamination from the aluminum chip flow.
The aluminum chips are then metered via a rotary airlock into pneumatic tubing and transported with the aid of a blower up to 500′ to dry chip collection bays to await the foundry furnaces.